Characterization of Phase Transformations and Chemical Composition in Rotary and Reciprocating Nickel-Titanium Endodontic Instruments
Keywords:
Nutrition, Therapy, Cancer management, OncologyAbstract
Background: The mechanical stresses to which the files are subjected differ depending on the type of movement. Therefore, the flexibility and resistance of the instruments must vary according to clinical needs. Which depends on the chemical composition and thermal treatment of the material, which gives it the atomic arrangement.
Objectives: Analyze the physical, chemical and thermal properties of rotary and reciprocating instruments.
Methods: The reciprocating and rotary instrumentation systems: WaveOne Gold, Reciproc Blue, Vortex Blue and V-Taper were evaluated under SEM, as well as their chemical composition by ICP-OES analysis, the phase transitions through DSC, and structurally by X-ray diffraction.
Results: Chemical analysis determined that the NiTi alloys, corresponding to Vortex Blue and V-Taper 2H, have an almost 1:1 Ni:Ti atomic ratio, but with a significant variation in the Ni content. Likewise, a low Au content was detected in the alternative WaveOne Gold system. Regarding the thermal analysis, the alternative V-taper 2H system showed a double exothermic transition associated with an intermediate rhombohedral phase known as R phase. The diffraction patterns show the transition of the austenitic phase.
Conclusions: Thermochemical analysis, Rotary Instruments, Reciproc Blue, Vortex Blue, V-Taper 2H, and WaveOne Gold.
References
Vashishtha H, Collins DM. The influence of dislocations on B19' and R-phase transformations in a NiTi shape memory alloy. Scripta Mater. 2025;255:116365..
Tadano JP, Alcalde MP, Limoeiro AG, Oliveira-Neto RS, Galvão PT, da Silva GF, et al. Impact of different cross-section designs of rotary instruments on smear layer removal, cyclic and torsional fatigue resistance: an in vitro study. Saudi Endod J. 2026;16(1):106–114.
Frenzel J, George EP, Dlouhy A, Somsen C, Wagner MFX, Eggeler G. Influence of Ni on martensitic phase transformations in NiTi shape memory alloys. Acta Mater. 2010;58(9):3444–3458.
Soto-Parra D, Vives E, Mañosa L, Matutes-Aquino JA, Flores-Zúñiga H, Planes A. Elastocaloric effect in Ti-Ni shape-memory wires associated with the B2↔B19′ and B2↔R structural transitions. Appl Phys Lett. 2016;108(7):071902.
Fan G, Chen W, Yang S, Zhu J, Ren X, Otsuka K. Origin of abnormal multi-stage martensitic transformation behavior in aged Ni-rich Ti-Ni shape memory alloys. Acta Mater. 2004;52(14):4351–4362.
Matumay-Santos FDP, Cabrera-Iberico MÁ. Evaluación de la resistencia a la flexión de limas rotatorias Protaper Gold, 2Shape, V-Taper Fanta Gold. Rev Cient Odontol. 2020;8(2):1–9.
Zhu J, Wu HH, Wu Y, Wang H, Zhang T, Xiao H, et al. Influence of Ni4Ti3 precipitation on martensitic transformations in NiTi shape memory alloy: R-phase transformation. Acta Mater. 2021;207:116665.
Santos LDA, Resende PD, Bahia MGDA, Buono VTL. Effects of R-phase on mechanical responses of a nickel-titanium endodontic instrument: structural characterization and finite element analysis. Sci World J. 2016;2016:1–9.
Tabassum S, Zafar K, Umer F. Nickel-titanium rotary file systems: what’s new? Eur Endod J. 2019;4:111–117.
Zupanc J, Vahdat-Pajouh N, Schäfer E. New thermomechanically treated NiTi alloys – a review. Int Endod J. 2018;51:1088–1103.
Gündoğar M, Özyürek T. Cyclic fatigue resistance of OneShape, HyFlex EDM, WaveOne Gold, and Reciproc Blue nickel-titanium instruments. J Endod. 2017;43(7):1136–1140.
Plotino G, Grande NM, Testarelli L, Gambarini G, Castagnola R, Rossetti A, et al. Cyclic fatigue of Reciproc and Reciproc Blue nickel-titanium reciprocating files at different environmental temperatures. J Endod. 2018;44(10):1549–1552.
De-Deus G, Silva EJNL, Vieira VTL, Belladonna FG, Elias CN, Plotino G, et al. Blue thermomechanical treatment optimizes fatigue resistance and flexibility of the Reciproc files. J Endod. 2017;43(3):462–466.
Furlan RD, Alcalde MP, Duarte MAH, Bramante CM, Piasecki L, Vivan RR. Cyclic and torsional fatigue resistance of seven rotary systems. Iran Endod J. 2021;16(2):1–7.
Méndez-González MV, Pozos-Guillén A, Betanzos-Juárez MC, Izquierdo-Orozco A, Gaitán-Fonseca C, Escobar-Barrios VA, et al. Influence of thermal treatment on fracture due to cyclic fatigue of rotary files. Odovtos Int J Dent Sci. 2025:96–110.
Shaw JA, Kyriakides S. Thermomechanical aspects of NiTi. J Mech Phys Solids. 1995;43(8):1243–1281.
Thompson SA. An overview of nickel-titanium alloys used in dentistry. Int Endod J. 2000;33(4):297–310.
Uchil J, Fernandes FMB, Mahesh KK. X-ray diffraction study of the phase transformations in NiTi shape memory alloy. Mater Charact. 2007;58(3):243–248.
Harrison T. Cyclic fatigue resistance of nickel-titanium rotary files in the martensitic state: a systematic review. 2019.
Prados-Privado M, Rojo R, Ivorra C, Prados-Frutos JC. Finite element analysis comparing WaveOne, WaveOne Gold, Reciproc and Reciproc Blue responses with bending and torsion tests. J Mech Behav Biomed Mater. 2019;90:165–172.
Madarati AA, Watts DC, Qualtrough AJE. Factors contributing to the separation of endodontic files. Br Dent J. 2008;204(5):241–245.
Wycoff RC, Berzins DW. An in vitro comparison of torsional stress properties of three different rotary nickel-titanium files with a similar cross-sectional design. J Endod. 2012;38(8):1118–1120.
Kim HC, Kim HJ, Lee CJ, Kim BM, Park JK, Versluis A. Mechanical response of nickel-titanium instruments with different cross-sectional designs during shaping of simulated curved canals. Int Endod J. 2009;42(7):593–602.
Rubio J, Zarzosa JI, Pallarés A. A comparative study of cyclic fatigue of 10 different types of endodontic instruments: an in vitro study. Acta Stomatol Croat. 2019;53(1):28–36.
